SSP Tube Fitter’s Tool Bag

The SSP Tube Fitter’s Bag has all the tools needed to bend, cut, fit, and gage tubing systems up to 1/2 in. The bag features:

• 25 High Quality TurnPro® tools and accessories
• Padded shoulder strap
• 14 pockets to organize tools
• Internal divider adjusts to keep tools secure and organized
• Limited Lifetime Warranty

Tube Fitter's Tool Bag Contents

• 24 in. Tool Bag
• 1/4 in. tube bender, 9/16 in. radius
• 3/8 in. tube bender, 15/16 in. radius
• 1/2 in. tube bender, 1 1/2 in. radius
• 1/8 to 1 1/8 in. SS tube cutter
• 316 SS Tube cutter (1/8 to 1 1/8 in.) with two replacement wheels
• 1/8 to 1/ 1/8 in. deburring and reaming tool
• 1/4 in. depth marking tool
• 3/8 in. depth marking tool
• 1/2 in. depth marking tool
• 1/8 in. manual presetting tool
• 1/4 in. manual presetting tool
• 3/8 in. manual presetting tool
• 1/2 in. manual presetting tool
• 9/16 in. hex ratchet wrench
• 5/8 in. hex ratchet wrench
• 11/16 in. hex ratchet wrench
• 7/8 in. hex ratchet wrench
• Gap Gage 1/4 to 1/2 in., 6 to 12mm
• PTFE Tape 1/4 in.
• PTFE Tape 1/2 in.
• Nickel PTFE Tape 1/2 in.
• SSP Tube Bender’s Guide
• SSP Tube Fitter’s Guide
• SSP Retractable Marking Pen TP-TFB-E

TurnPro Indexing Handle Tube Benders make fast and accurate bends in stainless steel and alloy tubing up to 1/2 OD x 0.083 wall.

Features

• Patented quick-action trigger release for bends beyond 90°
• Repositions handle when handles begin to meet
• Eliminates crossed handles
• Heavy-duty construction is suitable for high-cycle tube bending of stainless steel, alloys, other hardened tubing
• Rollers in bending handle
• Reduced friction and bending effort
• Eliminate scoring of tubing
• Comfortable and durable ergonomically molded cushion
• Vise lug for mounting in vise.
• Models to bend 1/4, 3/8 and 1/2 in. and 6, 8, 10 and 12 tubing.

TurnPro Tube Cutter
TurnPro Tube Cutters are specifically designed for cutting stainless steel tubing from 1/4 to 1 3/8 in. (6 to 35 mm).

Features

• Smooth, precise, spiral-free, tube cutting
• 6 Individual bearings
• Contoured frame for easy alignment
• Ergonomic knob
• Long-lasting hardened cutting wheel for stainless steel and hard alloys. Spare cutter wheel included.
• 100% factory tested to ensure accurate spiral-free cutting

The TurnPro Reaming and Deburring tool allow fast preparation of inner and out tube ends for tubing fitting applications.

Features:

• 6 Tungsten harded cutting edges specifically designed for stainless steel
• Inner and outer deburring in a single tool. 
• Bidirection cutting allow complete remeaming with 1/3 turn action.  No need to regrip the tool.
• Comfortable grip
• Durable construction

The TurnPro Depth Marking Tool provides and easy way to be sure that tubing is properly inserted in the tube fitting.  This is especially convenience when installing prebent tubing or where confined spaces make it difficult to push tubing into the tube fitting.

Features:

• Sizes from 1/4 to 1 in.  6 to 25 mm.
• Compact size
• Viewing port allow visual confirmation that the tubing has been properly inserted. 

TurnPro ratchet wrenches speed the installation of tube fittings and valves, and other hex nuts and bolts. The open jaw design makes it easy to slip the wrenches onto fittings and fasteners, even in tight spaces.  The 1/12th turn ratcheting makes installing fittings and fasteners in tight spaces faster and easier.

Features

• 12-point contact distributes torque pressures evenly on the flats of the hex, not at the corners.
• Fractional hex sizes: 9/16, 5/8, 11/ 16, 13/16, 1, and 1 1/8 in.
• Metric hex sizes:12, 14, 16, 19, and 22 mm

The TurnPro Manual Preswaging Tool (MPT) allows fitters to apply tube fitting ferrules to the tubing prior to final installation.  Apply the ferrule reduces allows final installation of the tubing with approximation 1/2 turn from from finger tight.  This is especially convenient when installing tubing systems in tough conditions or in tight spaces.
Features:

• Sizes from 1/4 to 1 in.  6 to 25 mm.
• Compact size
• Black Diamond Coated C-Max 300 insert makes can preset hundreds of ferrules.
• Threaded brass cap protects thread while in storage or your tool box. 

SSP TurnPro Tube Fitting Gap Gauges ensure that tube fitting are properly tighted up.  The gage is a no-go gage, which means that when the fitting is properly tightened, the gage should not fit between the shoulder of the tube fitting and the fitting nut. 

Features:

• 1/4 to 1 in. size (6 mm to 25 mm)
• 3/4 and 1 in. (16 and 25 mm) sizes measure from both tradition and snug installation guide lines.